Article Number1319 Type-DescriptionWICOIL 1319 F is a cooling lubricant improvers based on dearomatized hydrocarbons readily volatilized grease. The product evaporates almost no residue. UsageWICOIL 1319 F was developed for the non-cutting metal working (cold forming) like e.g. stamping, fine blanking, nibbling, stamping, etc. by aluminum, aluminum alloys, magnesium, titanium and titanium alloys. |
appearanceclear, bright WGK VKIS type1 viscosity(20°C) 15 mm²/s |
Article Number1421 Type-DescriptionWICOFORM S-10 is a cooling lubricant based on dearomatized hydrocarbons with readily volatilized lubricating improvers, chlorine and mineral oil free. The product evaporates without leaving any residue. UsageCutting processing (drilling, turning, milling and sawing) of aluminum, aluminum alloys, magnesium, titanium and titanium alloys. Non-cutting forming (stamping, fine blanking, and nibbling) for all contact materials, aluminum and copper alloys, such as on Bihler machines welding gun. |
appearancecolourless WGK VKIS type1 viscosity(20°C) 1,85 mm²/s |
Article Number1424 Type-DescriptionWICOFORM-S 10/5 is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricating improvers, chlorine and mineral oil free. The product evaporates almost residue-free. Optimum cooling and lubricating effect, particularly at HM-stamping tools. The remaining thin film of lubricant evaporates after a short time almost residue-free. Burn above 240 ° C remaining ash residue and residue-free. Thus, a clean and environmentally friendly work is guaranteed. UsageWICOFORM-S 10/5 is preferably sprayed with a spray-cooling ultra-thin after Fluidtec-spray cooling system to the parts or the tool. Even the smallest doses bring above-average in running life. We advise you gladly. |
appearanceyellowish WGK VKIS type1 viscosity(20°C) 2,5 mm²/s |
Article Number1428 Type-DescriptionWICOFORM S-22 is a synthetic cooling lubricant with chemically-active lubricating substances and highly effective lubricating film formers. The product is suitable for all materials. Optimum cooling and lubricating effect, especially with carbide tools, and improve the surface finish. The product exhibits very good wetting. With the MQL an additional evaporative cooling is produced. UsageCutting processing (tapping, tapping, reaming, milling and turning and sawing form) of alloy steels, Cr-Ni steels, titanium, aluminum alloys, non-ferrous and copper alloys. Non cutting processing (tapping, precision and speed stamping, bending, stamping, rolling and drawing, for example on Bihler stamping machines) of Cr-Ni, aluminum and copper alloys. |
appearancebright blueish WGK VKIS type1 viscosity(20°C) 63 mm²/s |
Article Number1430 Type-DescriptionWICODRAW 1430 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. After the airing, there remains a slight residual lubricating film. UsageNon-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc., and cutting operations, such as tapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys. |
appearanceclear, light blue WGK VKIS type1 viscosity(20°C) 4 mm²/s |
Article Number1433 Type-DescriptionWICODRAW 1433 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. UsageNon-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc., and metal-cutting machining operations, such as tapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys |
appearanceclear, light blue WGK VKIS type1 viscosity(20°C) 2 mm²/s |
Article Number1434 Type-DescriptionWICODRAW 1434 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricnat improver. UsageNon-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc., and cutting operations, such astTapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys. |
appearanceclear, light blue WGK VKIS type1 viscosity(20°C) 3 mm²/s |
Article Number1435 Type-DescriptionWICODRAW 1435 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. UsageNon-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc., and metal-cutting machining operations, such as tapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys. |
appearanceclear, bright WGK VKIS type1 viscosity(20°C) 2 mm²/s |
Article Number1451 Type-DescriptionWICOFORM S 15 is a cooling lubricant based on dearomatized hydrocarbons with the readily volatile lubricant improver, chlorine and mineral oil free. The product evaporates residue-free. UsageCutting processing (drilling, turning, milling and sawing) of aluminum, aluminum alloys of magnesium. Non-cutting forming (stamping, fine blanking, and nibbling) for all contact materials, aluminum and copper alloys, such as on Bihler machines welding gun. |
appearancecolourless WGK VKIS type1 viscosity(20°C) ca .1,75 mm²/s |
Article Number1452 Type-DescriptionWICOFORM S 15 PLUS is a cooling lubricant based on dearomatized hydrocarbons with the readily volatile lubricating improver, chlorine and mineral oil free. The product evaporates residue-free. UsageNon-cutting forming (stamping, fine blanking, and nibbling) for all contact materials, aluminum and copper alloys, such as on Bihler machines welding gun. |
appearancecolourless WGK VKIS type1 viscosity(20°C) ca. 2,0 mm²/s |